Hydrogenation of tackifying resin manufacturer

It is crucial to ensure that the hydrogenation of tackifying resin is not contaminated during storage. The following are some specific measures and suggestions from  hydrogenation of tackifying resin manufacturer of hydrogenated tackifiers to ensure the safe storage of hydrogenated tackifiers:

1. Packaging and Sealing

Suitable packaging should be used: Hydrogenation of tackifying resin should be packaged with specialized and reliable quality packaging materials. The inner packaging is generally made of clean and strong transparent plastic bags to keep the resin clean and prevent contamination; The outer layer can be made of plastic woven bags, ton bags, or plastic drums to further provide protection.

Ensure sealing: The packaging should have good sealing performance to prevent air, moisture, and impurities from entering the interior of the packaging. Before storage, the sealing of the packaging should be carefully checked. If there is any damage or loose sealing, the packaging should be replaced or repaired in a timely manner.

2. Storage environment control

Temperature and humidity: Hydrogenated tackifiers should be stored in an environment with appropriate temperature and humidity control. It is generally recommended to store at a temperature of 5-40 ℃ and a relative humidity of no more than 85% to prevent the resin from getting damp or deteriorating due to temperature and humidity changes.

Indoor storage: Resin should be stored indoors, avoiding direct sunlight, rain, and wind. Indoors should be kept dry, well ventilated, and away from sources of fire and heat.

3. Prevent contact with harmful substances

Isolation storage: During storage, hydrogenation of tackifying resin should be isolated from other harmful substances (such as acids, bases, oxidants, etc.) to prevent chemical reactions from causing resin deterioration or contamination.

Regular inspection: Regularly inspect the storage environment to ensure that no harmful substances are leaked or mixed into the resin. At the same time, the packaging and condition of the resin should also be checked, and any abnormalities should be dealt with promptly.

4. Operation precautions

Wear protective equipment: When handling, storing, and using hydrogenation of tackifying resins, operators should wear appropriate protective equipment such as gloves, masks, and goggles to prevent resin dust or harmful gases from affecting their health.

Avoid severe vibration: During transportation and storage, severe vibration and impact should be avoided to prevent damage to resin packaging or scattering of resin particles, which may cause contamination.

5. Regular maintenance and management

Record storage information: Establish a storage file for hydrogenation of tackifying resin, recording storage time, temperature, humidity, packaging status, and other information for tracking and management.
Regular inspection and handling: Regularly inspect the stored hydrogenation of tackifying resin. If any packaging damage, resin discoloration, or odor is found, timely measures should be taken to handle it, such as replacing the packaging, repackaging, or contacting the supplier for return or exchange.
In summary, by using appropriate packaging materials, controlling the storage environment, preventing contact with harmful substances, paying attention to operating procedures, and regularly maintaining and managing, it is possible to ensure that hydrogenated adhesive resins are not contaminated during storage and maintain their excellent performance and stability.