RX-80 rubber softener

RX-80 rubber softener plays an important role in rubber product processing, but the following precautions should also be taken when using it to ensure optimal performance and ensure production safety:

1. Add quantity control

The amount of RX-80 rubber softener added needs to be determined according to the specific formula and process requirements of the rubber product.
Excessive addition may lead to a decrease in the physical properties of rubber products, such as reduced strength and decreased wear resistance.

Insufficient addition may prevent it from fully exerting its softening, thickening, and reinforcing effects.

2. Mix evenly

Before adding RX-80 rubber softener to the rubber, it should be ensured that it has been thoroughly stirred evenly.

Mechanical stirring or manual stirring can be used to ensure that the softener is fully mixed with the rubber, avoiding situations where the local concentration is too high or too low.

3. Processing temperature and time

The processing temperature of RX-80 rubber softener in rubber should generally be controlled above 150 ℃ to ensure its full melting and penetration into the rubber.
The processing time needs to be determined according to the thickness and complexity of the rubber product, usually 10-15 minutes.

During the processing, it is necessary to strictly control the temperature and time to prevent the performance of rubber products from deteriorating due to excessively high or low temperatures and prolonged processing time.

4. Storage conditions

RX-80 rubber softener should be stored in a dry, ventilated, and cool environment, avoiding direct sunlight or high temperature environments.
The storage temperature should be controlled within an appropriate range to prevent it from softening, deteriorating, or causing safety accidents such as fires.

During the storage process, it is necessary to regularly check whether the packaging is intact to prevent the softening agent from getting damp or contaminated due to packaging damage.

5. Safe operation

When using RX-80 rubber softener, operators need to wear corresponding protective equipment, such as gloves, masks, etc.
Direct contact with softeners should be avoided to prevent irritation or injury to the skin or eyes.

If you accidentally come into contact with or inhale softeners, immediately rinse with plenty of water and seek medical assistance.

6. Other precautions

RX-80 rubber softener should be stored separately from other rubber additives to avoid confusion or chemical reactions.
Before use, it is necessary to check the quality of the softener to ensure that it meets the requirements for use.
If any abnormal situations occur during use, such as a significant decrease in the performance of rubber products or an increase in processing difficulty, the use should be stopped in a timely manner and the cause should be identified.
In summary, RX-80 rubber softener requires strict control of parameters such as addition amount, uniform mixing, processing temperature and time, as well as attention to storage conditions and safe operation during use. Only by following the correct usage methods can it ensure optimal performance and guarantee production safety.